View PHE845VD5100KR06L2_9023550.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3109_phe845_x1_760 ? 5/15/2015 1 benefts ? approvals: enec, ul, cul ? class x1 (iec 60384-14) ? rated voltage: 760vac 50/60hz ? capacitance range: 0.01 C 1.0 f ? lead spacing: 22.5 C 37.5 mm ? capacitance tolerance: 20%, 10% ? climatic category 40/105/56/b, iec 60068-1 ? tape and reel in accordance with iec 60286-2 ? rohs compliant and lead-free terminations ? operating temperature range of -40?c to +105?c ? 100% screening factory test at 4,250 vdc ? self-healing properties overview the phe845 series is constructed of metallized polypropylene flm encapsulated with self-extinguishing resin in a box of material meeting the requirements of ul 94 vC0. applications for use as a electromagnetic interference (emi) suppression flter in across-the-line applications requiring x1 safety classifcation. suitable for use in situations where failure of the capacitor would not lead to danger of electric shock. metallized polypropylene film emi suppression capacitors phe845 series, class x1, 760 vac, 105c legacy part number system phe845 v d 5100 m r06l2 series rated voltage (vac) lead spacing (mm) capacitance code (pf) capacitance tolerance packaging x1, metallized polypropylene v = 760 d = 22.5 f = 27.5 r = 37.5 the last three digits represent signifcant fgures. the frst digit specifes the total number of digits. k = 10% m = 20% see ordering options table new kemet part number system f 845 d d 103 m 760 c capacitor class series lead spacing (mm) size code capacitance code (pf) capacitance tolerance rated voltage (vac) packaging f = film x1, metallized polypropylene d = 22.5 f = 27.5 r = 37.5 see dimension table first two digits represent signifcant fgures. third digit specifes number of zeros. k = 10% m = 20% 760 = 760 see ordering options table one world. one kemet
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3109_phe845_x1_760 ? 5/15/2015 2 ordering options table lead spacing nominal (mm) type of leads and packaging lead length (mm) kemet lead and packaging code legacy lead and packaging code 22.5 standard lead and packaging options bulk (tray)Cshort leads 6 +0/-1 c r06l2 (1) other lead and packaging options pizza pack 6 +0/-1 z r06l2 (1) bulk (tray)Clong leads 30 +0/-1 alw0l r30l2 tape & reel (standard reel) h 0 = 18.5 +/-0.5 l r17t0 tape & reel (large reel) h 0 = 18.5 +/-0.5 p r17t1 27.5 standard lead and packaging options bulk (tray)Cshort leads 6 +0/-1 c r06l2 (1) other lead and packaging options pizza pack 6 +0/-1 z r06l2 (1) bulk (tray)Clong leads 30 +0/-1 = 18.5 +/-0.5 37.5 standard lead and packaging options bulk (tray)Cshort leads 6 +0/-1 c r06l2 (1) other lead and packaging options pizza pack 6 +0/-1 z r06l2 (1) (1) please specify bulk (tray) or pizza packaging film capacitors C metallized polypropylene film emi suppression capacitors phe845 series, class x1, 760 vac, 105c
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3109_phe845_x1_760 ? 5/15/2015 3 dimensions C millimeters l b h d p ll 0.5 front view side view kemet size code legacy size code p b h l d nominal tolerance nominal tolerance nominal tolerance nominal tolerance nominal tolerance dd d13 22.5 +/- 0.4 +/- 0.05 +/- 0.4 +/- 0.05 +/- 0.4 +/- 0.05 +/- 0.4 +/- 0.05 +/- 0.4 +/- 0.05 +/- 0.4 +/- 0.05 +/- 0.4 +/- 0.05 +/- 0.4 +/- 0.05 +/- 0.4 +/- 0.05 +/- 0.4 +/- 0.05 +/- 0.4 +/- 0.05 +/- 0.4 +/- 0.05 +/- 0.5 +/- 0.05 +/- 0.5 +/- 0.05 +/- 0.5 +/- 0.05 +/- 0.5 +/- 0.05 note: see ordering options table for lead length (ll) options. film capacitors C metallized polypropylene film emi suppression capacitors phe845 series, class x1, 760 vac, 105c
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3109_phe845_x1_760 ? 5/15/2015 4 performance characteristics dielectric polypropylene flm plates metal layer deposited by evaporation under vacuum winding non-inductive type. triple design. leads tinned wire protection plastic case, thermosetting resin flled. box material is solvent resistant and fame retardant according to ul94. rated voltage (v r ) 760 vac 50/60 hz capacitance range 0.010 f to 1.0 f capacitance values e6 series (iec 60063) capacitance tolerance 20% standard, 10% option temperature range -40c to 105c climatic category 40/105/56/b iec 60068-1 approvals enec, ul, cul related documents en/iec 60384-14:2005, ul 60384-14, can/csa e60384-14:09 dissipation factor (tan) maximum values at +23c frequency c 0.1 f 0.1 f < c 1 f 1 khz 0.1% 0.1% 10 khz 0.2% 0.4% 100 khz 0.6% - test voltage between terminals the 100% screening factory test is carried out at 4,250 vdc. the voltage level is selected to meet the requirements in applicable equipment standards. all electrical characteristics are checked after the test. it is not permitted to repeat this test as there is a risk to damage the capacitor. kemet is not liable in such case for any failures. resonance frequency tabulated self-resonance frequencies f o (see table 1 - ratings & part number reference) insulation resistance measured at +25c 5c, according to iec 60384C2 minimum values between terminals c 0.33 f c > 0.33 f 30,000 m 10,000 m ? f in dc applications recommended voltage 1,500 vdc film capacitors C metallized polypropylene film emi suppression capacitors phe845 series, class x1, 760 vac, 105c
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3109_phe845_x1_760 ? 5/15/2015 5 environmental test data test iec publication procedure endurance iec 60384-14:2005 1.25 x v r vac 50 hz, once every hour increase to 1,000 vac for 0.1 second, 1,000 hours at upper rated temperature vibration iec 60068C2C6 test fc 3 directions at 2 hours each 10 C 55 hz at 0.75 mm or 98 m/s 2 no visible damage. no open or short circuit. iec 60068-2-29 test eb 1,000 bumps at 390 m/s 2 no visible damage. no open or short circuit. change of temperature iec 60068-2-14 test na upper and lower rated temperature 5 cycles no visible damage. active flammability iec 60384-14:2005 v r + 20 surge pulses at 4 kv (pulse every 5 seconds) passive flammability iec 60384-14:2005 iec 60384C1, iec 60695C11C5 needle flame test damp heat steady state iec 60068-2-78 test cab +40c and 90 C 95% rh, 56 days approvals certifcation body mark specifcation file number intertek semko ab en/iec 60384-14 se/0140C17d ul ul 60384 and can/csa e60384-14:09 (760 vac) e73869 environmental compliance all kemet emi capacitors are rohs compliant. film capacitors C metallized polypropylene film emi suppression capacitors phe845 series, class x1, 760 vac, 105c
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3109_phe845_x1_760 ? 5/15/2015 6 table 1 C ratings & part number reference capacitance value (f) size code (new/legacy) max dimensions in mm lead spacing (p) f o (mhz) dv/dt (v/s) new kemet part number legacy part number b h l 0.010 dd/d13 6.5 14.5 26.0 22.5 11 100 f845dd103(1)760(2) phe845vd5100(1)(2) 0.015 dd/d13 6.5 14.5 26.0 22.5 9.2 100 f845dd153(1)760(2) phe845vd5150(1)(2) 0.022 dd/d13 6.5 14.5 26.0 22.5 7.6 100 f845dd223(1)760(2) phe845vd5220(1)(2) 0.033 df/d17 7.0 16.5 26.0 22.5 6.4 100 f845df333(1)760(2) phe845vd5330(1)(2) 0.047 dm/d15 9.0 18.5 26.0 22.5 5.3 100 f845dm473(1)760(2) phe845vd5470(1)(2) 0.068 dr/d18 10.5 19.0 26.0 22.5 4.4 100 f845dr683(1)760(2) phe845vd5680(1)(2) 0.10 dt/d16 11.0 21.5 26.0 22.5 3.5 100 f845dt104(1)760(2) phe845vd6100(1)(2) 0.15 dw/d20 13.5 23.0 26.0 22.5 3.1 100 f845dw154(1)760(2) phe845vd6150(1)(2) 0.22 dy/d19 15.5 24.5 26.0 22.5 2.7 100 f845dy224m760(2) phe845vy6220m(2) 0.10 fe/f11 10.5 20.5 31.5 27.5 3.4 100 f845fe104(1)760(2) phe845vf6100(1)(2) 0.15 fg/f12 11.5 22.5 31.5 27.5 3.0 100 f845fg154(1)760(2) phe845vf6150(1)(2) 0.22 fk/f03 13.5 23.0 31.5 27.5 2.4 100 f845fk224(1)760(2) phe845vf6220(1)(2) 0.33 fs/f15 19.0 29.0 31.5 27.5 2.0 100 f845fs334(1)760(2) phe845vf6330(1)(2) 0.47 fv/f16 21.0 30.0 31.5 27.5 1.6 100 f845fv474m760(2) phe845vz6470m(2) 0.47 rh/r04 15.0 26.0 41.0 37.5 1.6 100 f845rh474m760(2) phe845vw6470m(2) 0.47 rk/r02 16.5 32.0 41.0 37.5 1.6 100 f845rk474(1)760(2) phe845vr6470(1)(2) 0.68 rm/r03 19.0 36.0 41.0 37.5 1.2 100 f845rm684(1)760(2) phe845vr6680(1)(2) 1.0 rp/r06 21.0 38.0 41.0 37.5 1.0 100 f845rp105m760(2) phe845vw7100m(2) capacitance value (f) size code (new/ legacy) b (mm) h (mm) l (mm) lead spacing (p) f o (mhz) dv/dt (v/s) new kemet part number legacy part number (1) m = 20%, k = 10%. (2) insert ordering code for lead type and packaging. see ordering options table for available options. film capacitors C metallized polypropylene film emi suppression capacitors phe845 series, class x1, 760 vac, 105c
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3109_phe845_x1_760 ? 5/15/2015 7 manual soldering recommendations following is the recommendation for manual soldering with a soldering iron. the soldering iron tip temperature should be set at 350c (+10c maximum) with the soldering duration not to exceed more than 3 seconds. recommended soldering temperature 0 50 100 150 200 250 300 350 400 0 1 2 3 4 5 6 7 8 soldering time (sec) soldering iron bit temperature (deg c) soldering process the implementation of the rohs directive has resulted in the selection of snagcu (sac) alloys or sncu alloys as primary solder. this has increased the liquidus temperature from that of 183oc for snpb eutectic alloy to 217 C 221oc for the new alloys. as a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 C 170oc). wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 mm to 15 mm), and great care has to be taken during soldering. the recommended solder profles from kemet should be used. please consult kemet with any questions. in general, the wave soldering curve from iec publication 61760-1 edition 2 serves as a solid guideline for successful soldering. please see figure 1. refow soldering is not recommended for through-hole flm capacitors. exposing capacitors to a soldering profle in excess of the above the recommended limits may result to degradation or permanent damage to the capacitors. do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. insert through- hole parts after the curing of surface mount parts. consult kemet to discuss the actual temperature profle in the oven, if through-hole components must pass through the adhesive curing process. a maximum two soldering cycles is recommended. please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle. wave soldering recommendations 0 50 100 150 200 250 300 0 40 80 120 160 200 240 temperature ( c) time (s) ca 2 c/s ca 3.5 c/s typical ca 5 c/s cooling 2+3s max 115 c max t preheat t <150 c 100 c preheating typical first wave second wave 260 c film capacitors C metallized polypropylene film emi suppression capacitors phe845 series, class x1, 760 vac, 105c
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3109_phe845_x1_760 ? 5/15/2015 8 soldering process cont'd wave soldering recommendations cont'd 1. the table indicates the maximum set-up temperature of the soldering process figure 1 dielectric film material maximum preheat temperature maximum peak soldering temperature capacitor pitch 10 mm capacitor pitch = 15 mm capacitor pitch > 15 mm capacitor pitch 15 mm capacitor pitch > 15 mm polyester 130c 130c 130c 270c 270c polypropylene 100c 110c 130c 260c 270c paper 130c 130c 140c 270c 270c polyphenylene sulphide 150c 150c 160c 270c 270c 2. the maximum temperature measured inside the capacitor: set the temperature so that inside the element the maximum temperature is below the limit: dielectric film material maximum temperature measured inside the element polyester 160c polypropylene 110c paper 160c polyphenylene sulphide 160c temperature monitored inside the capacitor. selective soldering recommendations selective dip soldering is a variation of refow soldering. in this method, the printed circuit board with through-hole components to be soldered is preheated and transported over the solder bath as in normal fow soldering without touching the solder. when the board is over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten solder only at the places of the selected components, and pressed against the lower surface of the board to solder the components. the temperature profle for selective soldering is similar to the double wave fow soldering outlined in this document, however, instead of two baths, there is only one bath with a time from 3 to 10 seconds. in selective soldering, the risk of overheating is greater than in double wave fow soldering, and great care must be taken so that the parts are not overheated. film capacitors C metallized polypropylene film emi suppression capacitors phe845 series, class x1, 760 vac, 105c
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3109_phe845_x1_760 ? 5/15/2015 9 construction leads metal contact layer metal contact layer detailed cross section self-extinguishing resin molded plastic case molded plastic case single-sided metallized polypropylene film (second layer) single-sided metallized polypropylene film (first layer) margin margin margin single-sided metallized polypropylene film film winding scheme options 1 section single-sided metallized polypropylene film single-sided metallized polypropylene film single-sided metallized polypropylene film single-sided metallized polypropylene film 2 sections 3 sections 4 sections single-sided metallized polypropylene film polypropylene film dielectric 1 section double-sided metallized polyester film 3 sections double-sided metallized polyester carrier film polypropylene film dielectric double-sided metallized polyester carrier film 2 sections polypropylene film dielectric double-sided metallized polyester carrier film single-sided metallized polypropylene film 4 sections polypropylene film dielectric double-sided metallized polyester carrier film polypropylene film dielectric 1 section polypropylene film/foil 2 sections metal foil metal foil single-sided metallized polypropylene film polypropylene film dielectric metallized polyphenylene sulfide film with vacuum-evaporated aluminum electrodes 1 section metallized polyphenylene sulfide film (smr) metallized impregnated paper 1 section metallized impregnated paper single-sided metallized polyester film 1 section single-sided metallized polyester film polypropylene film dielectric 1 section axial - polypropylene film/foil 2 sections metal foil single-sided metallized polypropylene film polypropylene film dielectric metal foil single-sided metallized polypropylene film 2 sections polypropylene film dielectric double-sided metallized polyester carrier film single-sided metallized polypropylene film 1 section axial - single-sided metallized polypropylene film single-sided metallized polyester film 1 section axial - single-sided metallized polyester film axial - double-sided metallized polyester film winding scheme film capacitors C metallized polypropylene film emi suppression capacitors phe845 series, class x1, 760 vac, 105c
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3109_phe845_x1_760 ? 5/15/2015 10 marking iec climatic category approval marks top front capacitance capacitance tolerance series rated voltage rifa logo manufacturing date code manufacturing date code (iec 60062) y = year, z = month year code month code february september october november december film capacitors C metallized polypropylene film emi suppression capacitors phe845 series, class x1, 760 vac, 105c
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3109_phe845_x1_760 ? 5/15/2015 11 packaging quantities kemet size code legacy size code lead spacing thickness (mm) height (mm) length (mm) bulk short leads standard reel ? 360 mm large reel ? 500 mm ammo bulk (pizza) dd d13 6.5 14.5 26.0 234 300 600 440 dh d14 8.0 16.0 26.0 186 250 500 352 dm d15 9.0 18.5 26.0 308 250 500 308 dt d16 11.0 21.5 26.0 253 200 400 253 df d17 7.0 16.5 26.0 216 300 600 396 dr d18 10.5 19.0 26.0 264 200 400 264 dy d19 15.5 24.5 26.0 176 110 250 176 dw d20 13.5 23.0 26.0 209 160 300 209 fk f03 13.5 23.0 31.5 171 250 171 fe f11 10.5 20.5 31.5 216 350 216 fg f12 11.5 22.5 31.5 198 300 198 fm f13 14.5 24.5 31.5 153 250 153 fr f14 17.5 28.0 31.5 126 126 fs f15 19.0 29.0 31.5 117 117 fv f16 21.0 30.0 31.5 108 108 fh f17 21.0 12.5 31.5 108 108 ft f18 31.0 18.5 31.5 72 72 fq f19 27.5 16.0 31.5 81 81 rk r02 16.5 32.0 41.0 105 105 rm r03 19.0 36.0 41.0 91 91 rh r04 15.0 26.0 41.0 119 119 rf r05 13.0 24.0 41.0 140 140 rp r06 21.0 38.0 41.0 84 84 rs r08 28.0 43.0 41.0 54 54 film capacitors C metallized polypropylene film emi suppression capacitors phe845 series, class x1, 760 vac, 105c
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3109_phe845_x1_760 ? 5/15/2015 12 lead taping & packaging (iec 60286C2) taping specifcation description symbol dimensions (mm) lead space tolerance 22.5 27.5 lead spacing f 22.5 27.5 +0.6/-0.1 carrier tape width w 18 18 +1/-0.5 hold down tape width w 0 10 10 minimum hole position w 1 9 9 + 0.75/-0.5 hold down tape position w 2 3 3 maximum feed hole diameter d 0 4 4 0.2 feed hole lead space* p 0 12.7 12.7 0.2** centering of the lead wire p 1 7.8 5.3 0.7 component alignment ?h 2 2 2 deviation tape C plane ?p 1.3 1.3 maximum tape thickness t 0.9 0.9 maximum height of component from tape center h 0 *** 18.5 18.5 0.5 *available also 15mm. **maximum 1 mm on 20 lead spaces. *** h 0 = 16.5 mm is available upon request. film capacitors C metallized polypropylene film emi suppression capacitors phe845 series, class x1, 760 vac, 105c 0 0 lead spacing 5 mm lead spacing 7.5 mm lead spacing 10 ? 15mm lead spacing 22.5 ? 27.5 mm formed leads from 10 and 15 mm to 7.5 mm 0 0 0
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3109_phe845_x1_760 ? 5/15/2015 13 kemet corporation world headquarters 2835 kemet way simpsonville, sc 29681 mailing address: p.o. box 5928 greenville, sc 29606 www.kemet.com tel: 864-963-6300 fax: 864-963-6521 corporate off ces fort lauderdale, fl tel: 954-766-2800 north america southeast lake mary, fl tel: 407-855-8886 northeast wilmington, ma tel: 978-658-1663 central novi, mi tel: 248-306-9353 west milpitas, ca tel: 408-433-9950 mexico guadalajara, jalisco tel: 52-33-3123-2141 europe southern europe sasso marconi, italy tel: 39-051-939111 skopje, macedonia tel: 389-2-55-14-623 central europe landsberg, germany tel: 49-8191-3350800 kamen, germany tel: 49-2307-438110 northern europe harlow, united kingdom tel: 44-1279-460122 espoo, finland tel: 358-9-5406-5000 asia northeast asia hong kong tel: 852-2305-1168 shenzhen, china tel: 86-755-2518-1306 beijing, china tel: 86-10-5877-1075 shanghai, china tel: 86-21-6447-0707 seoul, south korea tel: 82-2-6294-0550 taipei, taiwan tel: 886-2-27528585 southeast asia singapore tel: 65-6701-8033 penang, malaysia tel: 60-4-6430200 bangalore, india tel: 91-806-53-76817 note: kemet reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. kemet does not assume any responsibility for infringement that might result from the use of kemet capacitors in potential circuit designs. kemet is a registered trademark of kemet electronics corporation. film capacitors C metallized polypropylene film emi suppression capacitors phe845 series, class x1, 760 vac, 105c
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3109_phe845_x1_760 ? 5/15/2015 14 disclaimer all product specif cations, statements, information and data (collectively, the information) in this datasheet are subject to change. the customer is responsible for checking and verifying the extent to which the information contained in this publication is applicable to an order at the time the order is placed. all information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on kemet electronics corporations (kemet) knowledge of typical operating conditions for such applications, but are not intended to constitute C and kemet specif cally disclaims C any warranty concerning suitability for a specif c customer application or use. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by kemet with reference to the use of kemets products is given gratis, and kemet assumes no obligation or liability for the advice given or results obtained. although kemet designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all productCrelated warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. film capacitors C metallized polypropylene film emi suppression capacitors phe845 series, class x1, 760 vac, 105c

▲Up To Search▲

Price & Availability of PHE845VD5100KR06L2

	To Download PHE845VD5100KR06L2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .